Table of Contents
Advertisement
11
Front panel
11.1
Safety notes
CAUTION
▶
When inserting the front panel module into the server enclosure,
ensure not to pinch or strain any connected cables.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
For more information, see
11.2
Front panel module
11.2.1
Replacing the left front panel module
Field Replaceable Unit
(FRU)
Preliminary and concluding steps: tool-less
Tools:
Main steps: Phillips PH2 / (+) No. 2
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ If applicable, remove the front bezel, see
page
48.
CX400 M6
"Important information" on page
41.
Upgrade and Maintenance Manual
Hardware: 5 minutes
42.
"Removing the front bezel" on
25.
165
Advertisement
Table of Contents
