Removing The Modular Lan Controller; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

9.4.2

Removing the Modular LAN controller

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
9.4.2.1

Required tools

Preliminary and concluding steps: tool-less
●
Removing expansion cards:
●
– Phillips PH2 / (+) No. 2 screw driver
9.4.2.2

Preliminary steps

Before installing a Modular LAN controller, perform the following steps:
"Disabling BitLocker functionality" on page 85
Ê
"Disabling SVOM boot watchdog functionality" on page 86
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
RX300 S7
Upgrade and Maintenance Manual
Expansion cards and backup units
69.
70.
221