Installing The System Fan Module - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

▶ Press in on the locking tab while slightly lifting up the system fan module (1).
▶ Hold the fan module by the two green grips (see orange arrows) and lift it
out of the chassis (2).
4.8.2

Installing the system fan module

Installing the standard system fan module
Figure 41: Installing the standard system fan module
▶ Insert the system fan module into the chassis.
Be careful not to pinch any cables under the air duct.
▶ Fit the four hooks on the system fan module into the keyhole slots in the
chassis.
▶ Press down on the system fan module until the four hooks lock in the narrow
ends of the keyhole slots (see circles).
TX1330 M4 Upgrade and Maintenance Manual
Basic hardware procedures
85