Installing 3.5-Inch Hdd Modules; Preliminary Steps; Removing A 3.5-Inch Dummy Module - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) and solid state drive (SSD)
7.4.4

Installing 3.5-inch HDD modules

Customer Replaceable Unit
(CRU)
Tools: tool-less
7.4.4.1

Preliminary steps

Ê Locate the correct drive bay, see section
on page 159.
7.4.4.2

Removing a 3.5-inch dummy module

I
In configuration with only one 4x 3.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no backplane
behind.
Figure 68: Removing the dummy lock
Ê Only valid after upgrading the server with the second backplane: pull the
dummy lock out of the dummy cover. Please be aware that the dummy lock
can be damaged.
162 Upgrade and Maintenance Manual
Hardware: 5 minutes
"3.5-inch HDD/SSD configurations"
RX2520 M4