Hard disk drive (HDD) / solid state disk (SSD)
7.4.2
Installing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
Tools:
tool-less
Preliminary steps
▶ Locate the correct drive bay, see
Removing a 2.5-inch HDD/SSD dummy module
The dummy module is the installation frame without an installed HDD/
SSD.
Figure 43: Removing a 2.5-inch HDD/SSD dummy module
▶ Pinch the green release button and open the locking lever (1).
▶ Pull the HDD/SSD dummy module out of its bay (2).
90
"Overview of configurations" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
88.
GX2570 M6