2Nd Wake-Up Call - Same Guest Station - NEC NEAX2400 IMX Features Manual

Hotel features
Hide thumbs Also See for NEAX2400 IMX:
Table of Contents

Advertisement

S-128
2nd Wake-up Call – Same Guest Station
General Description
By combining with AUTOMATIC WAKE-UP [A-27] service, this service allows two wake-up calls to be set for a
guest room.
Operating Procedure
The notice asking the guest to call the Attendant when the guest wants to set the second wake-up call should be
prepared in the guest room. The guest sees the notice and calls the attendant. The attendant sets the second wake-up
call using the Console as follows.
To set the second wake-up call using the WUS key:
When the guest calls in to request the second wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
Step
Press the WUS key while connected to the guest
1
room.
2
Press the WUS key again.
3
Dial the wake-up time requested.
4
Press the ENTER key.
If the wake-up time is entered after the guest line is released:
Step
1
Press the WUS key.
2
Press the WUS key again.
3
Dial the wake-up time requested.
4
Dial the guest station number.
5
Press the ENTER key.
To set the second wake-up call for another guest
consecutively, repeat steps 4 and 5.
6
When all wake-up calls are set, press the END
key.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
2nd Wake-up Call – Same Guest Station
Action
Action
Result
The character display shows "WAKE UP ENT."
The display shows "2ND WAKE UP ENT (A)." In
case of setting AUTOMATIC WAKE-UP –
HOTEL ATTENDANT ASSISTANCE [A-58],
press the WUS key again; the display shows "2ND
WAKE UP ENT (S)."
(Note 1)
Result
The character display shows "WAKE UP ENT."
The display shows "2ND WAKE UP ENT (A)."
In case of setting AUTOMATIC WAKE-UP –
HOTEL ATTENDANT ASSISTANCE [A-58],
press the WUS key again; the display shows "2ND
WAKE UP ENT (S)."
The display shows the entered time.
The display shows the station number.
(Note 1)
S-128
Page 135

Advertisement

Table of Contents
loading

Table of Contents