Programming Ringing At Keysets; Changing Ringing Assignments Using The System Programming - NEC DS1000 Quick Setup Manual

Analog extensions (e.g., single line telephones) plug into the system's analog ports. In DS1000, these are exten-
sions 316-323. The circuit types for these extensions in DS1000 are preset and do not have to be programmed.
To set an extension's circuit type:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1801:EXTENSION PROG
STATION #?nnn
3. Enter the number of the keyset extension you want to program (e.g., 300) +
1801:STA:nnn
PT TYP?n:nnnn
4. Enter the extension circuit type that matches the telephone plugged in the extension port (
ton Standard,
15 =Analog station) +
1801:STA:nnn
PT TYP?n:nnnn
5. Enter a different circuit type for the extension (if you made a mistake).
Press
Press

Programming Ringing at Keysets

In DS1000 by default, trunks 1-6 appear on line keys 1-6 on every keyset. In addition, line keys ring for each
incoming call on that key. This means that every keyset rings for each incoming call.
In DS2000 by default, trunks 1-12 appear on line keys 1-12 on every keyset. These trunks ring at extensions
300-315 and flash (without ringing) at all other extensions.
There are two ways to change the ringing assignments on a keyset's line keys: using the system program-
ming or the User Programmable Features.

Changing Ringing Assignments Using the System Programming

To change line key ringing:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1805:RING ASSIGNMENT
STATION #?nnn
3. Enter the number of the keyset extension you want to program (e.g., 300) +
1805:STA:nnn
LINE NUMBER?n
4. Enter the number of the trunk you want to program (e.g., 1) +
1805:STA:nnn LINE:n
nnnnnnn
5. For the extension and trunk selected, enter the ring option +
1 = Lamp only (no ringing)
2 = Ringing day and night
3 = Ringing at night, lamp only during the day
DS1000/2000 Quick Setup Guide
1801 + HOLD . You see:
02 =22 Button Display,
HOLD . You see:
OR
CONF to select another extension.
OR
CONF twice to exit program 1801.
1805 + HOLD . You see:
The currently programmed ringing option for the trunk selected displays.
Section 1: Start-up Programming
06 =34-Button Super Display,
HOLD
CONF
Section 1: Start-up Programming
. You see:
HOLD
01 =22 But-
09 =34-Button Super Display,
HOLD . You see:
. You see:
:
1
1-7