Hobart 9OC24S Operation Manual page 312

7-1
Page 2
(1)
(2)
(3)
(4)
OPERATION, MAINTENANCE, AND OVERHAUL MANUAL, TM-240A
SELF-PROPELLED GENERATOR SET, SPEC. NO. 5381A
"FIGURE-ITEM NO. " Column
This column lists the figure number of the illustration applicable to a particular
parts list and also identifies each part in the list by an item number. These item
numbers also appear on the illustration . Each item number on an illustration is
connected to the part to which it pertains by a leader line. Thus the figure and
item nu'mbering system ties the parts lists to the illustrations and vice versa. The
figure and index numbers are also used in the numerical index to assist the user
in finding the illustration of a part when the part number is known.
"HOBART PART NUMBER" Column
ALL part numbers appearing in this column are Hobartnumbers.
In all instances
where the part is a purchased item, the vendor's identifying five-digit code and
his part number will appear in the "NOMENCLATURE" column. Vendor codes
which are modified by Hobart will be identified as such in the "NOMENClATURE"
column.
In case Hobart does not have an identifying part number for a purchased
part, the "HOBART PART NUMBER" column will reflect "No Number" and the
vendor's number will be shown in the "NOMENCLATURE" column. Parts man-
ufactured by Hobart reflect no vendor code or part number in the "NOMEN -,
CLATURE " column.
"NOMENCLATURE " Column
The item identifying name appears in this column. The indenture method is used
to indicate item relationship. Thus, components of an assembly are listed directly
below the assembly and indented one space. Vendor codes and part numbers for
purchased parts are shown in this column. Hobart modification to vendor items
is also noted in this column.
"EFF" (Effective) Column
This column is used to indicate the applicability of parts to different models of
equipment. When more than one model of equipment is covered by a parts
list, there are some parts which are used on only one model. This column is
used for insertion of a code letter "A", "B", etc., to indicate these parts and
to identify the particular model they are used on. Parts in this manual are coded
as follows:
Uncoded parts are usable on all models.
Parts coded "A" are usable on Specs 5381A only
Parts coded "B" are usable on Specs 5381A, Vl only
Parts coded "C" are usable on
Specs
5381A, V2 only
act 30/73