Hobart 9OC24S Operation Manual page 16

FOBART
s
QQ
;MOTOR GENERATOR DIVISION
t
z
z
HOBART BROTHERS COMPANY
"c
'I;
Q. BL,+e
OPERATION, MAINTENANCE, AND OVERHAUL MANUAL, TM-240A
SELF-PROPELLED GENERATOR SET, SPEC. NO. 5381A
above . When referenced material is located in the same Chapter/Section as
the reference, only the paragraph identification is given.
Example:
(Ref. Para. 1, A) means the material is to be found in paragraph 1, A, of
the same Chapter/Section.
When referenced material is located in another Chapter/Section,
both
the
Chapter/Section number and the paragraph identification are given.
Example :
(Ref. 1-2, Para. 1, A) means that the referenced material is located in
Chapter/Section l-2, and identified by paragraph 1, A.
Components shown in illustrations and illustrations themse Ives are referenced
in a similar manner. When this type reference is made, the item number of
the part and the Figure number in which it appears are given.
Example:
(Ref. 2, Fig. 3) f re ers to item number 2 which appears in illustration Figure
3 of the same Chapter/Section.
When the referenced Figure appears in another Chapter/Section, the reference
will include the Chapter/Section number.
Example :
(Ref. 2-3; 1, Fig. 4) tel Is the user to refer to Chapter/Section 2-3, and to
see item 1, in Figure 4.
Once a Figure number reference has been established for a series of instructional
steps, the Figure number is not repeated. Only the item numbers of parts in-
volved are referenced.
For example, an instruction might appear like this: "Loosen screw (2, Fig. 6),
slide out connector (4), and remove brush (6)".
When an item is referenced without a figure number, it will always apply to the
last preceding Figure number mentioned in the text.
NOTE: The word "See" may appear in some references, as (See Fig. 2). It
means exactly the same thing as "Ref. ", however, its ,usage seems a
little more direct and definite.
Introduction
page 4
Ott 30/73