Hobart 9OC24S Operation Manual page 225

GENERATOR DIVISION
HOBART BROTHERS cOMP*N"
OPERATION, MAINTENANCE, AND OVERHAUL MANUAL, TM-240A
SELF-PROPELLED GENERATOR SET, SPEC. NO. 5381A
This is a cut-away view of the control box showing ihe location of terminal boards wi'ich
may be used for testing and checking.
Each terminal board is identified by a letter; A, B, C, etc.
Each terminalon a board is identified by a number; 1, 2, 3, etc.
Terminals are numbered from LEFT to RIGHT on horizontally mounted boards, and from
BOTTOM to TOP on vertically mounted boards. (Number 1 termir'ai on each board is
indicated on the illustration.)
Any individual terminal may be identified by combining the board identification letter with
the terminal number.
Example: Terminal "A-8" is the eighth terminal from the LEFT on board "A".
Terminal "G-4" is the fourth terminal from the BOTTOM on board "G".
Terminal Boards
Figure 3
act 30/73
3-2
..~
Page 9