Hobart 9OC24S Operation Manual page 311

""Y-n.
;fflOTOR GENERATOR DIVISION I
:
2
HOBART
BROTHERS COMPAN"
OPERATION, MAINTENANCE, AND OVERHAUL MANUAL, TM-240A
SELF-PROPELLED GENERATOR SET, SPEC. NO. 5381A
SECTION 1. INTRODUCTION
1. Genera I
The Illustrated Parts List identifies, describes, and illustrates main assemblies, sub-
assemblies, and detail parts of the Engine Driven Generator Set manufactured by Motor
Generator Division, Hobart Brothers Company, Troy, Ohio, and identified as Speci-
fication No. 5381A.
2.
PurPOse
The purpose of this list is to provide parts identification and descriptive information to
maintenance and provisioning personnel for use in provisioning, requisitioning, pur-
chasing, storing, and issuing of spare parts.
Arrangement
Chapter 7 is arranged as follows:
Table of Contents
Section 1 - Introduction
Section 2 - Manufacturer's Codes
Section 3 - Parts List
Section 4 - Numerical Index
4. Explanation of Ports List
A. Contents
The parts list contains a breakdown of the equipment into assemblies, subassemblies,
and detail parts. All parts of the equipment are listed except:
(1) Standard h ar d ware items (attaching parts) such as nuts, screws, washers, etc.,
which are available commercially.
(2) Bulk items such as wire, cable, sleeving, tubing, etc., which are also
commercially available.
(3) Permanently attached parts which lose their identity by being welded, soldered,
riveted, etc., to other parts, weldments, or assemblies.
B. Parts List Form
This form is divided into five columns. Beginning at the left side'of the form and
proceeding to the right, columns are identified as follows:
Ott 30/73
7-l
Page 1
.