Chapter 33. Iscsi Chap Configuration Mode (Type 9235); Password; Username - IBM WebSphere XS40 Command Reference Manual

Chapter 33. iSCSI CHAP configuration mode (Type 9235)

This chapter provides an alphabetic listing of commands that are available in iSCSI
CHAP configuration mode. The CHAP is the challenge handshake authentication
protocol.
To enter this configuration mode, use the Global iscsi-chap command. While in
this mode, define the credential to use to access the iSCSI volume.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in iSCSI CHAP configuration mode.

password

Specifies the password for the CHAP user.
Syntax
password password
Parameters
password
Guidelines
The password command specifies the password for the CHAP user.
Examples
v Sets Gerry as the user with the password BigSecret as the credentials for the

username

Specifies the user for the CHAP.
Syntax
username user
Parameters
user
Guidelines
The username command specifies the user for the CHAP.
© Copyright IBM Corp. 1999, 2008
Specifies the password for the CHAP user.
CHAP-2 CHAP.
# iscsi-chap CHAP-2
New iSCSI CHAP configuration mode
# username Gerry
# password BigSecret
#
Specifies a user name.
361