Table of Contents
Advertisement
Syntax
system-name string
Parameters
string
Guidelines
The system-name command specifies a name that the NSS server uses to identify
the NSS client. NSS server commands identify NSS clients by system name in the
output when displaying information for connected NSS clients. When an NSS
client is a z/OS system, this field contains the system name, such as MVS046.
Examples
v Sets DP001 as the system-name.
user-name
Specifies a user name to authenticate as in SAF on the NSS server
Syntax
user-name user
Parameters
user
Guidelines
The user name must match an existing user ID on the NSS Server. Use in
conjunction with the password command.
946
Command Reference
Specifies a name for the NSS client. Minimum length is 1. Maximum
length is 8.
Valid characters are:
v a through z
v A through Z
v 0 through 9
v _ (underscore)
v - (dash)
Embedded spaces are invalid.
# zos-nss nssClient1
New zOS NSS Client configuration
# system-name DP001
Specifies a user name to use to authenticate to the NSS server. Minimum
length is 1. Maximum length is 8.
Valid characters are:
v a through z
v A through Z
v 0 through 9
v _ (underscore)
v - (dash)
Embedded spaces are invalid.
Advertisement
Table of Contents
