Table of Contents
Advertisement
Guidelines
A firmware upgrade performed with the boot image command retains current
configuration data, allowing the appliance to be restored to a known, stable state if
necessary. The previous firmware image and associated configuration data is
referred to as the secondary install.
While, you can use the boot delete command to delete the secondary install, keep
in mind that its deletion will prevent firmware rollback as provided by the boot
switch command. Consequently, deletion of the secondary install is not
recommended.
Related Commands
boot image, boot switch
Examples
v Deletes the secondary install.
boot image
Designates the startup firmware image.
Syntax
boot image image
Parameters
image
Guidelines
The boot image and boot config commands work in conjunction to define the
restart process. The boot image command designates the appliance startup image,
and the boot config command designates the startup configuration.
Use boot image to decrypt and decompress scrypt image files.
Related Commands
boot config, boot update, shutdown
Examples
v Designates tR2207-x0503-B1.scrypt as the startup firmware image.
boot switch
Toggles between primary and secondary installs.
278
Command Reference
# boot delete
Previous firmware install deleted
#
Specifies the name of the firmware image to restart the appliance.
# boot image R2207-x0503-B1.scrypt
. .
.
Completed!
#
Advertisement
Table of Contents
