Table of Contents
Advertisement
Syntax
front-persistent-timeout timerValue
Parameters
timerValue
Guidelines
The front-persistent-timeout command sets the inter-transaction timeout value.
This value is the maximum idle time to allow between the completion of a TCP
transaction and the initiation of a new TCP transaction on the proxy-to-client
connection. If the specified idle timeout is exceeded, the connection is torn down.
An idle TCP connection can remain in the idle state for as long as 20 seconds after
the expiration of the persistence timer.
Related Commands
back-persistent-timeout, back-timeout, front-timeout, persistent-connections
front-protocol
Assigns a specified protocol handler to the Web Service Proxy.
Syntax
front-protocol name
no front-protocol [name]
Parameters
name
Guidelines
Issue this command as many times as needed to add the desired front side
protocol handlers to the current proxy.
A protocol handler provides a protocol-specific conduit that links external clients to
the proxy.
Use the no front-protocol command to remove the assignment of one or all
client-side protocol handlers from the Web Service Proxy.
Related Commands
source-http, source-https
front-timeout
Sets the intra-transaction timeout value.
792
Command Reference
Specifies the maximum inter-transaction idle time in seconds. Use an
integer in the range of 0 through 7200. The default is 180. A time value of 0
disables persistent connections.
Identifies the client-side protocol handler.
Advertisement
Table of Contents
