Table of Contents
Advertisement
Parameters
server
Guidelines
From the command line, the appliance supports one NTP server at a time. To
designate a new NTP server, use the no ntp-service command to delete the current
server.
Note: The WebGUI supports the specification of multiple NTP servers. If you
Related Commands
refresh-interval
Examples
v Identifies the NTP server and specifies a clock synchronization interval of 5
518
Command Reference
Identifies the NTP server by host name or IP address.
invoke the no ntp-service command, all defined NTP servers are deleted. To
delete just one of the defined NTP servers, use the WebGUI.
minutes.
# ntp-service
NTP Service configuration mode
# remote-server Chronos-1
# refresh-interval 300
#
Advertisement
Table of Contents
