Related Commands
mime-back-headers, request-attachments, response-attachments
Examples
v Disables client-side support for MIME package headers and subsequently
monitor-count
Assigns a Count Monitor.
Syntax
monitor-count name
no monitor-count name
Parameters
name
Guidelines
Use the monitor-count command to assign one or more Count Monitors to the
current Multi-Protocol Gateway.
Count Monitors watch for defined messaging events and increment counters each
time the event occurs. When a certain threshold is reached, the monitor can either
post a notification to a log or block service for a configured amount of time.
Use the no monitor-count command to remote the assignment of a Count monitor
from a Multi-Protocol Gateway.
Related Commands
monitor-duration (Global), monitor-service (Global)
Examples
v Assigns the mpgwCounter Count Monitor to the current Multi-Protocol Gateway.
v Removes the mpgwCounter Count Monitor.
monitor-duration
Assigns a Duration Monitor.
452
Command Reference
enables support, which restores the default state.
# mime-front-headers off
. .
.
# mime-front-headers on
#
Specifies the name of an existing Count Monitor.
# monitor-count mpgwCounter
#
# no monitor-count mpgwCounter
#