Table of Contents
Advertisement
save-config-overwrite
Specifies system behavior after a running configuration is saved.
Syntax
save-config overwrite
Guidelines
By default the Save Config button and the write mem command write the current
running configuration to config:///autoconfig.cfg, and designate that file as the
startup configuration. To override the default behavior, place the no form of this
command in a startup configuration script.
Related Commands
boot config, write mem
Examples
v Assuming that this file is the startup configuration, clicking the Save Config
v Assuming that this file is the startup configuration, clicking the Save Config
ssl
Assigns an SSL Proxy Profile.
Syntax
ssl name
Parameters
name
782
Command Reference
WebGUI button:
– Writes the running configuration to config:///autoconfig.cfg
– Retains the file designated by the boot config command as the startup
configuration
# no save-config overwrite
#
WebGUI button:
– Writes the running configuration to config:///autoconfig.cfg
– Designates config:///autoconfig.cfg as the startup configuration
# save-config overwrite
#
Specifies the name of an existing SSL Proxy Profile.
Advertisement
Table of Contents
