Syntax
wsrm-destination-maximum-sequences maximumSequences
Parameters
maximumSequences
Guidelines
The wsrm-destination-maximum-sequences command sets a limit on the
maximum number of simultaneously active sequences to Reliable Messaging
destinations of this DataPower service. Attempts by clients to create sequences in
excess of this limit result in a SOAP Faults. This property controls memory
resource utilization.
Related Commands
wsrm
wsrm-request-force
Indicates whether to require Reliable Messaging for all SOAP messages that
request rules process.
Syntax
wsrm-request-force {on | off}
Parameters
on
off
Guidelines
The xxx command indicates whether to require the use of Reliable Messaging for
all SOAP messages that request rules process. The client must establish a sequence
with a CreateSequence SOAP call and must include a Sequence in each SOAP
header. Any SOAP message without a Sequence results in a SOAP fault.
Related Commands
wsrm
wsrm-response-force
Indicates whether to require Reliable Messaging for all SOAP messages that
response rules process.
Syntax
wsrm-response-force {on | off}
Parameters
on
840
Command Reference
Specifies the maximum number of simultaneous active sequences. The
default is 400.
Requires Reliable Messaging for all requests.
(Default) Does not require Reliable Messaging for all requests.
Requires Reliable Messaging for all responses.