Parameters
target
event-code
Guidelines
The logging eventcode commands adds an event code to the subscription list for
the specified log target. This command is equivalent to using the event-code
command in Logging configuration mode.
Use the show logging target command to display a list of log targets.
Use the View List of Event Codes from the WebGUI to view a list of all event
codes.
Use the no form of the logging eventcode command to remove an event code
from the inclusion list to the specified log.
Related Commands
logging eventfilter, logging target, event-code (Logging), show logging target
logging eventfilter
Adds an event code to the suppression list for a specific log.
Syntax
logging eventfilter target event-code
no logging eventfilter target event-code
Parameters
target
event-code
Guidelines
The logging eventfilter commands adds an event code to the suppression list for
the specified log target. This command is equivalent to using the event-filter
command in Logging configuration mode.
Use the show logging target command to display a list of log targets.
Use the View List of Event Codes from the WebGUI to view a list of all event
codes.
Use the no form of the logging eventfilter command to remove an event code
from the exclusion list of the specified log.
Related Commands
logging eventcode, logging target, event-filter (Logging), show logging target
62
Command Reference
Specifies the name of an existing log target.
Specifies the hexadecimal value of the event code.
Specifies the name of an existing log target.
Specifies the hexadecimal value of the event code.