Table of Contents
Advertisement
Related Commands
mc-ldap-bind-dn, mc-ldap-parameters, mc-ldap-bind-password, mc-ldap-search,
mc-loadbalancer-group, mc-server-host, mc-server-port
Examples
v Uses the ldapone SSL Proxy Profile for secure communications.
mc-loadbalancer-group
Assigns a load balancer group to for LDAP credentials searching.
Syntax
mc-loadbalancer-group name
Parameters
name
Guidelines
The mc-loadbalancer-group command assigns an LDAP load balancer group
instead of a single LDAP server for performing an LDAP search to retrieve the
user's group.
This command is relevant only in the following situation:
v LDAP search is enabled with the mc-ldap-search command
v When the credentials mapping method, as defined with the mc-method
This command is mutually exclusive with the combination of the mc-server-host
and mc-server-port commands.
Related Commands
mc-ldap-search, mc-method, mc-server-host, mc-server-port, show
loadbalancer-status
Examples
v Uses a local XML file to map credentials and performs an LDAP search to
mc-method
Specifies the credentials mapping method.
# ldap-sslproxy ldapone
#
Specifics the name of an existing load balancer group.
command, is local or xmlfile.
retrieve the distinguished name.
# mc-method xmlfile
# mc-info-url local:///RBM-MC.xml
# mc-ldap-search on
# mc-loadbalancer-group LBGroup1
# mc-ldap-bind-dn "cn=proxyuser"
# mc-ldap-bind-password p@Ssw0rd
#
Chapter 64. RBM Settings configuration mode
603
Advertisement
Table of Contents
