Guidelines
Use the no suppress command to restore the standard HTTP header field to the
packet stream.
Related Commands
host-rewriting, inject
Examples
v Deletes the Authorization HTTP header field from the packet stream directed to
v Restores the Authorization HTTP header field to the packet stream directed to
type
Specifies the Multi-Protocol Gateway type.
Syntax
type {dynamic-backend | static-backend}
Parameters
dynamic-backend
static-backend
Related Commands
backend-url
Examples
v Changes the Multi-Protocol Gateway type to dynamic backend.
urlrewrite-policy
Assigns a URL Rewrite Policy.
Syntax
urlrewrite-policy name
no urlrewrite-policy name
466
Command Reference
the HTTP server.
# suppress back Authorization
#
the HTTP server.
# no suppress back Authorization
#
Sets the gateway type to dynamic. The address of the target server is
dynamically extracted from the client request using the dp:set-target or
dp:xset-target extension elements.
(Default) Sets the gateway type to static. Use the backend-url command to
set a static backend destination.
# type dynamic-backend
#