Table of Contents
Advertisement
iname
Changes the iSCSI qualified name.
Syntax
iname IQN
Parameters
IQN
Guidelines
The iname command changes the "burned in" value for the iSCSI qualified name
(IQN). If you need to change this value, specify an IQN in the following format:
v iqn.2001-04.com.example
v iqn.2001-04.com.example:storage:diskarrays-sn-a8675309
v iqn.2001-04.com.example:storage.tape1.sys1.xyz
v iqn.2001-04.com.example:storage.disk2.sys1.xyz
Examples
v Makes the iSCSI qualified name iqn.2001-
ip-address
Specifies the IP address for the HBA.
Syntax
ip-address address
Parameters
address Specifies the IP address.
Guidelines
The ip-address command specifies the IP address for the HBA. Use this command
with the ip default-gateway command to define the network connection.
Do not use the ip-address command or the ip default-gateway command when
dhcp is on.
Related Commands
dhcp, ip default-gateway
Examples
v Sets 10.10.10.44 as the IP address and 10.10.10.46 as the default gateway for
364
Command Reference
Specifies the IQN.
04.com.example:storage.disk6.Balboa for iscsi-2 HBA .
# iscsi-hba iscsi-2
Modify iSCSI Host Bus Adapter configuration
# iname iqn.2001-04.com.example:storage.disk6.Balboa
#
the iscsi-2 HBA .
Advertisement
Table of Contents
