Table of Contents
Advertisement
local-ip-rewrite
Indicates whether to rewrite local IP addresses.
Syntax
local-ip-rewrite {on | off}
Parameters
on
off
Guidelines
The local-ip-rewrite command indicates whether to rewrite local IP addresses on
import. When rewriting IP addresses, a service in the configuration package that
binds to eth1 is rewritten to bind to eth1 when imported.
overwrite-files
Indicates whether to overwrite files when the configuration package contains the
same file.
Syntax
overwrite-files {on | off}
Parameters
on
off
Guidelines
The overwrite-files command indicates whether to overwrite files when the
configuration package contains the same file. If files in the configuration package
overwrite files on the system, a warning is written to the log.
Related Commands
destination-domain, overwrite-objects
Examples
v Specifies that existing files in the destination domain are not overwritten by
overwrite-objects
Indicates whether to overwrite objects when the configuration package contains the
same object.
(Default) Rewrites IP addresses to match the local configuration when
imported.
Retains the original IP address in the configuration package.
(Default) Overwrites files of the same name.
Does not import the file if a file of the same name exists.
imported files.
# overwrite-files off
#
Chapter 30. Import Configuration File configuration mode
345
Advertisement
Table of Contents
