Table of Contents
Advertisement
Syntax
locate-device {on | off}
Parameters
on
off
Guidelines
The locate-device command activates or deactivates the locate LED light on Type
9235 appliances. The locate LED is on the front of the appliance.
v When activated, the locate LED light is illuminated in blue.
v When deactivated, the locate LED light is not illuminated.
Only administrators in the default domain with the appropriate permissions can
control the locate LED.
Examples
v Activates the locate LED light.
v Deactivates the locate LED light
known-host
Adds or removes an SSH peer as an SSH known host.
Syntax
known-host host ssh-rsa key
no known-host host
Parameters
host
ssh-rsa
key
Guidelines
The known-host command adds an SSH peer as an SSH known host.
The no known-host command removes an SSH peer as an SSH known host.
58
Command Reference
Activates the locate LED light.
(Default) Deactivates the locate LED light.
# locate-device on
#
# locate-device off
#
Specifies the fully-qualified host name or IP address for the peer. For
example:
ragnarok.datapower.com
10.97.111.108
Identifies RSA as the key type.
Specifies the host public key for the peer. For example:
AAAAB3NzaC1yc2EAAAABIwAAAIEA1J/99rRvdZmVvkaKvcG2a+PeCm25
p8OJl87SA6mtFxudA2ME6n3lcXEakpQ8KFTpPbBXt+yDKNFR9gNHIfRl
UDho1HAN/a0gEsvrnDY5wKrTcRHrqDc/x0buPzbsEmXi0lud5Pl7+BXQ
VpPbyVujoHINCrx0k/z7Qpkozb4qZd8==
Advertisement
Table of Contents
