Chapter 1. Initial Login And Common Commands; Initial Login Commands - IBM WebSphere XS40 Command Reference Manual

Chapter 1. Initial login and common commands

This chapter provides an alphabetic listing of the commands that are available
before entering a specific configuration mode (available at initial login) and
commands that are available in most, if not all, configuration modes.

Initial login commands

For a list of the commands that are available after an initial login, refer to Table 1.
This table provides a listing of the available commands and their purpose. To
determine whether these commands are available to a specific user-type class after
an initial login, refer to Table 2.
© Copyright IBM Corp. 1999, 2008
Table 1. Initial login commands and their general purpose
Command Purpose
1
alias Creates a command macro.
1
clock Sets the date or time.
configure terminal Enters Global configuration mode.
1
disable Enters User Mode.
disconnect Closes a user session.
echo Echoes text to the console.
enable Enters Privileged mode.
exec Calls and runs a target configuration script from another
configuration script.
exit Closes the CLI connection.
help Displays online help.
Logs in to the appliance as a specific user.
login
1
ntp Identifies an NTP server.
Determines if a target host is reachable on the network.
ping
show Displays configuration or status information
2
shutdown Restarts or shuts down the appliance.
switch domain Moves to a specified domain.
1
template Runs an interactive command line script.
1
test schema Tests conformity of an XML file against a schema.
1
test tcp-connection Tests the TCP connection to a remote host.
top Returns users to their initial log in mode.
1
traceroute Traces the network path to a target host.
1
Also available in Global mode.
2
Also available in Flash configuration mode.
Table 2. Commands by type of user that are available after initial login
Command admin user
alias
Privileged-type user
Yes Yes
User-type user
No
1