Table of Contents
Advertisement
Parameters
count
Guidelines
The max-login-failure command defines the number of failed login attempts to
permit before a successful login. If the value is 3 and the user has failed three
consecutive login attempts, the behavior on the next login attempt for this user is
as follows:
v If failure, the account is locked out. The duration of the lockout depends on the
v If successful, the account is not locked out and the count is reset.
Note: The max-login failure command applies to all accounts including the admin
Related Commands
lockout-duration
Examples
v Enables lockout behavior for accounts that on the fifth login failure, the account
v Disables lockout behavior.
mc-custom-url
Specifies the URL of the custom style sheet.
Syntax
mc-custom-url URL
Parameters
URL
Guidelines
The mc-custom-url command defines the fully-qualified file name (URL) of the
custom style sheet for mapping credentials method. This command is relevant
when the mapping credentials method, as defined with the mc-method command,
is custom.
Related Commands
mc-method
Specifies the maximum number of failed login attempts to allow before
lockout. A value of 0 disables account lockout. Use an integer in the range
of 0 through 64. The default is 3.
value defined by the lockout-duration command.
account. The only difference is that the admin account cannot be locked out
until reset. When the duration is 0, the admin account is locked out for 120
minutes or until re-enabled by another administrator.
is locked out locked out until reset by a privileged administrator:
# lockout-duration 0
# max-login-failure 4
# max-login failure 0
Specifies the location of the style sheet.
Chapter 64. RBM Settings configuration mode
597
Advertisement
Table of Contents
