port
Specifies the TCP port to monitor for client requests.
Syntax
port port
Parameters
port
Guidelines
This command only sets the TCP port for the Stateful Raw XML Handler. This port
applies to all configured local addresses. Use the local-address command to set the
IP address on which the handler listens.
Related Commands
local-address, remote-address, remote-port
Examples
v Binds the current Stateful Raw XML Handler to the specified port number.
remote-address
Specifies the remote server address.
Syntax
remote-address address
Parameters
address Binds the Stateful Raw XML Handler to a single, specific interface-port
Guidelines
This command only sets the IP address for the remote server. Use the remote-port
command to set the remote TCP port.
Related Commands
remote-port
Examples
v Binds the current Stateful Raw XML Handler to the specified remote IP address.
remote-port
Specifies the remote server TCP port.
Binds the Stateful Raw XML Handler to a specific port.
# port 16000
#
pair.
# remote-address 192.168.1.11
#
Chapter 74. Stateful Raw XML Handler configuration mode
647