Parameters
name
Guidelines
While in Peer Group configuration mode, you identify members of an SLM
Monitoring Peer Group. Group members run identical SLM policies and aggregate
data providing enforcement of SLM policies across multiple appliances.
Use the cancel or exit command to leave Peer Group configuration mode and enter
Global configuration mode.
Use the no peer-group command to delete a Peer Group.
Related Commands
cancel, exit
policy-attachments
Enters Policy Attachment configuration mode.
Syntax
policy-attachments name
no policy-attachments [name]
Parameters
name
Guidelines
Use the cancel or exit command to exit Policy Attachment configuration mode and
return to Global configuration mode.
Use the no policy-attachments command to delete an Policy Attachment object.
Related Commands
cancel, exit
policy-parameters
Enters Policy Parameters configuration mode.
Syntax
policy-parameters name
no policy-parameters [name]
Specifies the name of the peer group.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Specifies the name of the object.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Chapter 2. Global configuration mode
77