Parameters
address Specifies the IP address that receives traps.
port
community
Guidelines
The local SNMP agent or engine issues the following generic traps:
v coldStart
v linkDown
v linkUp
v authenticationFailure
Use the no trap-target command to delete a previously configured recipient of
SNMP traps.
Examples
v Specifies a recipient of SNMP traps at 10.10.10.11:162. The trap recipient is
v Specifies a recipient of SNMP traps at 10.10.100.19:162. The trap recipient is
v Deletes 10.10.10.11:162 from the list of trap recipients.
version
Specifies the supported SNMP version.
Syntax
version {1 | 2c | 3}
Parameters
1
2c
3
Examples
v Specifies support for SNMP Version 1.
640
Command Reference
Optionally identifies a UDP port at the IP address. Use an integer in the
range of 0 to 65535. The default is 162.
Optionally provides a community name (essentially a password) that is
included within the SNMP message header. The default is public.
accessed with the public community.
# trap-target 10.10.10.11
#
accessed with the OpenView community.
# trap-target 10.10.100.19 OpenView
#
# no trap-target 10.10.10.11
#
Specifies support for SNMP Version 1 as defined in RFC 1155, RFC 1156,
and RFC 1157.
(Default) Specifies support for SNMP Version 2c as originally defined in
RFC 1901 through RFC 1908
Specifies support for SNMP Version 3 as defined in RFC 2261 through RFC
2265.
# version 1
#