Table of Contents
Advertisement
Parameters
address Binds the Stateless Raw XML Handler to a single, specific interface-port
0
Guidelines
This command only sets the IP address for the Stateless Raw XML Handler. Use
the port command to set the TCP port on which the Stateless Raw XML Handler
listens.
Related Commands
port, remote-address, remote-port
Examples
v Binds the current Stateless Raw XML Handler to the specified IP address.
v Binds the current Stateless Raw XML Handler to all enabled interfaces. This
persistent-connections
Indicates whether to establish persistent connections
Syntax
persistent-connections {on | off}
Parameters
on
off
Guidelines
With persistent connections enabled, the default state for both HTTP 1.0 and HTTP
1.1, the Stateless Raw XML Handler negotiates with the remote HTTP peer and
establishes a persistent connection if agreeable to the peer.
With persistent connections disabled, the Stateless Raw XML Handler refuses to
negotiate the establishment of persistent connections. Alternatively, use the no
persistent-connections command.
Examples
v Disables persistent connection negotiation.
650
Command Reference
pair.
Binds the Stateless Raw XML Handler to the specified port on all enabled
interfaces.
# local-address 192.168.1.10
#
configuration is strongly discouraged for production environments.
# local-address 0
#
(Default) Enables the establishment of persistent connections.
Disables the establishment of persistent connections.
# persistent-connections off
#
or
Advertisement
Table of Contents
