Wsrm-Source-Maximum-Queue-Length; Wsrm-Source-Maximum-Sequences - IBM WebSphere XS40 Command Reference Manual

DataPower service creates a Reliable Messaging source to send requests to the
server. If the server does not accept the offer, DataPower server does not create a
Reliable Messaging destination.
Related Commands
wsrm, wsrm-source-request-create-sequence

wsrm-source-maximum-queue-length

Specifies the maximum number of messages held in the queue.
Syntax
wsrm-source-maximum-queue-length numberOfMessages
Parameters
numberOfMessages
Guidelines
The wsrm-source-maximum-queue-length command specifies the maximum
number of messages held in the Reliable Messaging queue while waiting for Ack
messages. This property controls memory utilization.
Related Commands
wsrm, wsrm-destination-accept-offers, wsrm-source-request-create-sequence,
wsrm-source-response-create-sequence

wsrm-source-maximum-sequences

Sets the limit of simultaneous active sequences.
Syntax
wsrm-source-maximum-sequences limit
Parameters
limit
Guidelines
The wsrm-source-maximum-sequences command sets a limit on the maximum
number of simultaneously active sequences from Reliable Messaging sources of
this DataPower server. Each remote Reliable Messaging destination endpoint
reference (URL) requires one sequence. Transactions that request the creation of
sequences in excess of this limit result in a SOAP Fault. This property controls
memory resource utilization.
Related Commands
wsrm
484
Command Reference
Specifies the size of the queue in number of messages. Use an integer in
the range of 1 through 256. The default is 30.
Specifies the number of simultaneous active sequence. Use an integer in
the range of 1 through 2048. The default is 400.