Table of Contents
Advertisement
Chapter 31. Include Configuration File configuration mode
This chapter provides an alphabetic list of commands in Include Configuration File
configuration mode.
To enter this configuration mode, use the Global include-config command. While
in this mode, specify the location of configuration files to appended to other
configuration files.
All of the commands in "Common commands" on page 2 and most, but not all, of
the commands in Chapter 114, "Monitoring commands," on page 949 are available
in this configuration mode.
auto-execute
Specifies whether the included-configuration is executed at appliance startup.
Syntax
auto-execute {on | off}
Parameters
on
off
Guidelines
The auto-execute indicates whether to import the configuration package at startup
or to import the configuration only when manually triggered. When configuration
data are marked external, they cannot be saved to the startup configuration.
Examples
v Disables automatic execution at appliance startup.
config-url
Specifies the location of a configuration file to include in another configuration file.
Syntax
config-url URL
© Copyright IBM Corp. 1999, 2008
(Default) Imports the configuration package at startup. The configuration is
marked external and cannot be saved to the startup configuration. This
behavior is equivalent to always importing the configuration.
Imports the configuration package when manually triggered. The
configuration is not marked external and can be saved to the startup
configuration. This behavior is equivalent to importing the configuration
one time.
# include-config StdSvcProxy
New Include Configuration File configuration
# auto-execute off
#
347
Advertisement
Table of Contents
