Table of Contents
Advertisement
unprocessed
Related Commands
response-type, soap-schema-url
Examples
v Characterizes client-originated traffic as XML.
v Characterizes client-originated traffic as SOAP.
response-attachments
Specifies the processing mode for SOAP attachments in server responses.
Syntax
response-attachments mode
Parameters
mode
460
Command Reference
(Default) Characterizes the client-originated traffic stream as non-XML
traffic that is not transformed by the Multi-Protocol Gateway.
# request-type xml
#
# request-type soap
#
Specifies one of the following keywords to indicate the processing mode
for SOAP attachments:
allow Allows messages that contain attachments, and processes needed
attachments. Needed attachments are buffered, but attachments
that are not needed might be streamed directly to output.
Attachments are buffered when an action in the processing rule
requests any of the following:
v Needed attachments
v All attachments in the package before the needed attachment
v All attachments in the package for a needed manifest
v All attachments in the package if the package does not contain
the needed attachment
reject
Rejects messages that contain attachments.
strip
(Default) Removes attachments from the message before
processing.
streaming
Allows messages that contain attachments in streaming mode, but
provides limited processing. Messages in the form of a SOAP
message package, which is a SOAP with Attachments message, are
supported. Processing can be applied individually to each
attachment. The appliance does not create a manifest of all
attachments. Attachments must be accessed and processed in the
order that they appear in the package.
unprocessed
Allows messages that contain attachments, but does not process
attachments. This option permits the forwarding of messages that
Advertisement
Table of Contents
