Related Commands
matching
show memory
Displays memory usage.
Syntax
show memory
Guidelines
The show memory command displays memory usage. This command is also
available from the diag (login) mode.
Output
v
show netarp
Displays the address resolution table
Syntax
show netarp
Related Commands
arp
show ntp-refresh
Displays the refresh status for the current NTP server.
Syntax
show ntp-refresh
Guidelines
The show ntp-refresh command provides the following details about the current
NTP server, if configured:
v The IP address of the last NTP server that was contacted
v The results of the contact
v The time after the refresh
Related Commands
ntp, show ntp-service
# show memory
Memory Usage: 10 %
Total Memory: 4149324 kbytes
Used Memory: 433761 kbytes
Free Memory: 3715563 kbytes
Requested Memory: 503216 kbytes
XG4 Resource Usage: 1 %
#
Chapter 114. Monitoring commands
961