Table of Contents
Advertisement
Chapter 28. HTTP Service configuration mode
This chapter provides an alphabetic listing of commands that are available in
HTTP Service configuration mode.
To enter this configuration mode, use the Global httpserv command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in HTTP Service configuration mode.
acl
Assigns an Access Control List (ACL).
Syntax
acl name
Parameters
name
Guidelines
Assignment of an ACL to a HTTP service is optional. If an ACL is assigned to the
service, only those IP addresses specifically allowed by the ACL can initiate access
to the HTTP Service on the appliance; if an ACL is not assigned, access to the
HTTP service on the appliance is unrestricted.
Related Commands
acl (Global), allow (ACL), deny (ACL)
identifier
Specifies the contents of the Server response header field.
Syntax
identifier string
no identifier
Parameters
string
Guidelines
The Server response header field generally contains information (name and
version) that describes the server application software. By default, inclusion of the
Server response header field is suppressed.
© Copyright IBM Corp. 1999, 2008
Specifics the name of an ACL.
Specifies the contents of the Server response header field. Use double
quotes to bracket strings that contain spaces.
329
Advertisement
Table of Contents
