Table of Contents
Advertisement
Note: To disable an Ethernet interface, use the admin-state command in Interface
Use the exit command to exit Interface configuration mode and enter Global
configuration mode.
Related Commands
admin-state (Interface), exit, show interface
Examples
v Enters Interface configuration mode for Ethernet interface 0.
v Enters Interface configuration mode for Ethernet interface 0.
v Deletes Ethernet interface 0 from the network.
ip domain
Adds an entry to the IP domain-suffix search table.
Syntax
ip domain domain
no ip domain domain
Parameters
domain Specifies the base domain name to which a host name can be prefixed.
Guidelines
This command enables the usage on non-fully qualified domain names (host
names) by specifying a list of one or more domain names that can be appended to
a host name.
Use multiple ip domain commands to add more than one entry to the IP domain
name table.
The appliance attempts to resolve a host name in conjunction with any domains
identified by the ip domain command. The host name is resolved as soon as a
match is found.
Use the no ip domain command to delete an entry from the table.
Related Commands
search-domain
configuration mode.
# interface ethernet 0
Interface configuration mode (ethernet 0)
#
# interface eth0
Interface configuration mode (eth0)
#
# interface eth0 disable
no interface eth0#
#
Chapter 2. Global configuration mode
51
Advertisement
Table of Contents
