Table of Contents
Advertisement
Chapter 77. TAM configuration mode
This chapter provides an alphabetic listing of commands that are available in TAM
configuration mode. TAM is an abbreviation for IBM Tivoli Access Manager.
To enter this configuration mode, use the Global tam command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in TAM configuration mode.
file
Specifies the location of the TAM configuration file.
Syntax
file name
Parameters
name
ldap-ssl-key-file
Specifies the location of an SSL key file that contains a certificate used for LDAP
access
Syntax
ldap-ssl-key-file name
Parameters
name
Guidelines
The TAM client application configuration file must contain an [ldap]
ssl-keyfile-pwd to access the file specified by this command. This key file
contains the LDAP server certificate and handles the certificates that are used in
LDAP communication.
Applicable only when use-ldap-ssl is on.
Related Commands
ldap-ssl-key-file-password, use-ldap-ssl
ldap-ssl-key-file-dn
Specifies the subject DN of the certificate.
© Copyright IBM Corp. 1999, 2008
Specifies the name of the TAM configuration file.
Specifies the name of the TAM SSL key file to use for LDAP server access.
657
Advertisement
Table of Contents
