Audit Delete-Backup (Common Criteria); Audit Level (Common Criteria); Audit Reserve (Common Criteria) - IBM WebSphere XS40 Command Reference Manual

audit delete-backup (Common Criteria)

Deletes the archived version of the audit log.
Syntax
audit delete-backup
Context
Available only when the appliance is in Common Criteria mode.
Guidelines
The audit delete-backup command deletes the audit:///audit-log.1 file. This file is
the archived version of the audit log and is created when the log reaches When the
size of the audit log, the audit:///audit-log file, reaches approximately 250
kilobytes, the appliance save this file as the audit:///audit-log.1 file, which
overwrites the previous version of the audit:///audit-log.1 file.
After invoking the command, the interface prompts for confirmation.

audit level (Common Criteria)

Sets the audit level of the firmware.
Syntax
audit level {full | standard}
Parameters
full
standard
Context
Available only when the appliance is in Common Criteria mode.
Guidelines
The audit level command sets the audit level of the firmware.
v When full auditing is not strictly required, set the level to standard.
v When corporate or business security policies require full auditing, set the level

audit reserve (Common Criteria)

Reserves disk space for the audit log.
Syntax
audit reserve kilobytes
(Default) Audits the standard set of events and decisions on information
flow.
Audits the standard set of events only. Does not audit decisions on
information flow.
to full. This audit level impacts performance.
Chapter 2. Global configuration mode
25