Table of Contents
Advertisement
Syntax
import-package name
no import-package name
Parameters
name
Guidelines
The import-package command enters Import Configuration File configuration
mode to create a new Import Configuration File object or to modify an existing
Import Configuration File object. While in this configuration mode, use the
mode-specific commands to define the configuration of the Import Configuration
File object.
To delete an Import Configuration File object, use the no import-package
command.
To exit this configuration mode without saving configuration changes to the
running configuration, use the cancel command.
To exit this configuration mode and save configuration changes to the running
configuration, use the exit command.
Related Commands
cancel, exit
include-config
Enters Include Configuration File configuration mode.
Syntax
include-config filename
no include-config filename
Parameters
filename
Guidelines
An include configuration object references a local or remote configuration file that
can be included in other configuration files.
Use the no include-config command to delete an include configuration object.
Specifies the name of the Import Configuration File object.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Specifies the name of the include configuration object.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Chapter 2. Global configuration mode
49
Advertisement
Table of Contents
