Table of Contents
Advertisement
Syntax
inactivity-timeout seconds
Parameters
seconds
Related Commands
mount-timeout
mount-timeout
Specifies the maximum time the appliance attempts to complete an NFS mount
before abandoning the effort.
Syntax
mount-timeout seconds
Parameters
seconds
Guidelines
Failure to complete the NFS mount process within the period specified by this
timer results in a file open error and the cancellation of the NFS mount process.
This timer should be set to a value greater than the interval between NFS
maintenance rounds, as defined by the mount-refresh-time command.
Related Commands
inactivity-timeout, mount-refresh-time
read-only
Specifies the NFS mount type.
Syntax
read-only {on | off}
Parameters
on
off
498
Command Reference
Specifies the number of seconds an idle NFS mount, that is a mount with
no file read-write activity, is maintained before the file system is
unmounted. The default is 900. A value of 0 indicates that the NFS mount
is never unmounted.
Specifies the maximum period of time, expressed in seconds, that the
appliance allows for the completion of an NFS mount. Use an integer in
the range of 10 through 240. The default is 30.
Indicates that the mount allows only read transactions.
Indicates that the mount allows read and write transactions.
Advertisement
Table of Contents
