Table of Contents
Advertisement
message-matching
Enters Message Matching configuration mode.
Syntax
message-matching name
no message-matching name
Parameters
name
Guidelines
The message-matching command create a traffic-flow definition that describes a
traffic stream to be subject to administrative monitoring and control.
When in Message Matching configuration mode, you can specify traffic stream
characteristics in terms of traffic origin (IP address), HTTP header content, SSL
identity, or requested documents.
Use the cancel or exit command to leave Message Matching configuration mode
and enter Global configuration mode.
Use the no message-matching command to delete a traffic-flow definition.
Related Commands
cancel, exit, reset
message-type
Enters Message Type configuration mode.
Syntax
message-type name
no message-type name
Parameters
name
Guidelines
The message-type command creates a message class consists of one or more
traffic-flow definitions that were created previously with the message-matching
command. It identifies a set of traffic streams that are subject to specific,
rules-based administrative monitoring and control.
68
Command Reference
Specifies the name of the traffic-flow definition.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Specifies the name of the message class.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Advertisement
Table of Contents
