Table of Contents
Advertisement
list. A candidate address is denied or granted access to the service provider in
accordance with the first matching clause. Consequently, the order of clauses is
important in an Access Control List.
Use the no acl command to delete a named ACL.
Use the exit command to exit Access Control list configuration mode and return to
Global configuration mode.
Related Commands
cancel, exit, ssh, xml-mgmt
Examples
v Enters Access Control list configuration mode to create the ACL-1 standalone
v Deletes the standalone ACL-1 ACL.
v Enters ACL configuration mode for the SSH service.
v Enters ACL configuration mode for the XML Management Interface.
action
Enters Processing Action configuration mode.
Syntax
action name
no action name
Parameters
name
Guidelines
Use the no action command to delete a Processing Action.
Use the cancel or exit commands to exit Processing Action configuration mode and
return to Global configuration mode.
22
Command Reference
ACL.
# acl ACL-1
ACL configuration mode
#
# no acl ACL-1
#
# acl XSLProxy-1
# acl ssh
ACL configuration mode
#
# acl xml-mgmt
ACL configuration mode
#
Specifies the name of the Processing Action.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Advertisement
Table of Contents
