Parameters
URL
mail-server
email-address
Guidelines
You cannot send a file from the cert:, dp:, or dpcert: directory.
Related Commands
failure-notification, send error-report
Examples
v Sends the config:///autoconfig.cfg file to supportteam@customer.com through
service battery-installed
Notifies the firmware that the battery was changed.
Syntax
service battery-installed
Guidelines
The service battery-installed command resets the installation date of the battery.
Use this command after changing the battery.
After the expiration period of 2 years, the firmware generates log messages that
the battery should be changed.
service nagle
Enables or disables the Nagle algorithm.
Syntax
service nagle
Identifies the target file and takes one of the following forms:
v audit:///filename
v pubcert:///filename
v config:///filename
v store:///filename
v image:///filename
v tasktemplates:///filename
v logstore:///filename
v temporary:///filename
v logtemp:///filename
Identifies a local SMTP server by IP address or by host name.
Specifies the fully-qualified Email addresses of the file recipient.
the smtp.customer.com mail server.
# send file config:///autoconfig.cfg
smtp.customer.com supportteam@customer.com
#
Chapter 2. Global configuration mode
93