client is one greater than the last one that was processed. InOrder delivery
assurance increases memory and resource utilization by the Reliable Messaging
destination.
Related Commands
wsrm, wsrm-destination-maximum-inorder-queue-length
wsrm-destination-maximum-inorder-queue-length
Specifies the maximum number of messages held in the queue.
Syntax
wsrm-destination-maximum-inorder-queue-length numberOfMessages
Parameters
numberOfMessages
Guidelines
The wsrm-destination-maximum-inorder-queue-length command specifies the
maximum number of messages held in the Reliable Messaging queue beyond a
gap in the received sequence numbers.
This property controls memory utilization.
Related Commands
wsrm, wsrm-destination-inorder
wsrm-destination-maximum-sequences
Sets a limit on the maximum number of simultaneously active sequences to
Reliable Messaging destinations.
Syntax
wsrm-destination-maximum-sequences maximumSequences
Parameters
maximumSequences
Guidelines
The wsrm-destination-maximum-sequences command sets a limit on the
maximum number of simultaneously active sequences to Reliable Messaging
destinations of this DataPower service. Attempts by clients to create sequences in
excess of this limit result in a SOAP Faults. This property controls memory
resource utilization.
Related Commands
wsrm
Specifies the maximum number of messages beyond the gap. Use an
integer in the range of 1 through 256. The default is 10.
Specifies the maximum number of simultaneous active sequences. The
default is 400.
Chapter 49. Multi-Protocol Gateway configuration mode
479