Table of Contents
Advertisement
Related Commands
exit
domain
Enters Application Domain configuration mode.
Syntax
domain name
no domain name
Parameters
name
Guidelines
The domain command enters Application Domain configuration mode to create a
new Application Domain object or to modify an existing Application Domain
object. While in this configuration mode, use the mode-specific commands to
define the configuration of the Application Domain object.
To delete an Application Domain object, use the no domain command.
To exit this configuration mode without saving configuration changes to the
running configuration, use the cancel command.
To exit this configuration mode and save configuration changes to the running
configuration, use the exit command.
Related Commands
cancel, exit
failure-notification
Enters Failure Notification configuration mode.
Syntax
failure-notification
no failure-notification
Guidelines
Use the no failure-notification command to disable failure reporting. By default,
failure reporting is disabled.
Use the cancel or exit command to exit Failure Notification configuration mode
and enter Global configuration mode.
44
Command Reference
Specifies the name of the application domain.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Advertisement
Table of Contents
