Table of Contents
Advertisement
The trace is not specific to a port, but rather to an SSL Proxy Profile. Consequently,
the traced object is the first connection using the target SSL Proxy Profile.
Keep in mind that a single SSL Proxy Profile can be used by multiple DataPower
services. If the target SSL proxy is two-way, the first connection in either direction
(that is, client-to-server or server-to-client) is traced.
A CLI shell supports only a single trace session. However, simultaneous multiple
traces (up to a maximum of five sessions) using different shells are allowed.
Note: Tracing severely diminishes performance of the appliance, multiple
Examples
v Initiates an SSL trace for the SSL-1 SSL Proxy.
startup
Starts the DataPower installation wizard.
Syntax
startup
Guidelines
The startup command is available when you initially log in to the appliance. You
can invoke this command after accepting the DataPower license and changing the
password to the admin account.
The installation wizard prompts for information about the basic configuration for
the appliance. This information that you provide became the running configuration
that the appliance uses.
The installation wizard prompts for the following information, which you should
gather before invoking the installation wizard:
v Interface IP addresses and masks
v Default gateways
v Interface mode
v IP name servers
When the installation wizard completes, you can review the configuration. After
reviewing the configuration, you can save the configuration or discard it.
108
Command Reference
SSL connection completed
simultaneous sessions even more so.
Tracing is intended for debugging purposes only and should not be
implemented in operational environments.
# ssltrace SSL-1
Press ENTER to stop tracing
Waiting for connection to begin
. .
.
#
Advertisement
Table of Contents
