Table of Contents
Advertisement
File Capture
Debug Log
Probe Enabled
Diagnostics
show file
Displays a specified printable file.
Syntax
show file URL
Parameters
URL
Guidelines
You cannot use the show file command to display a file stored in the cert:
directory.
Related Commands
copy, dir, delete
show firmware
Displays the current firmware version, with image type and installation date.
Syntax
show firmware
Guidelines
The show firmware command provides a subset of the details of the show
firmware-version command and includes information about whether the current
firmware image is the primary or secondary installation image and the date on
which the image was installed.
954
Command Reference
Indicates whether the XML File Capture utility is enabled in the domain.
Indicates whether the domain is using the debug logging level.
Indicates whether one or more services in the domain has the probe
enable.
Indicates that diagnostic tracing is enabled. Diagnostic tracing applies to all
domain.
Note: The only time that tracing should be enabled is at the explicit
direction of IBM Support.
Identifies the URL of the file to display. The URL takes the
directory:///filename format, where:
directory
Specifies a directory on the appliance. Refer to "Directories on the
appliance" on page xxii for details.
filename
Specifies the name of a file in the directory.
Advertisement
Table of Contents
