Event-Code; Event-Detection - IBM WebSphere XS40 Command Reference Manual

Examples
v Specifies which event classes and which event priorities to log.

event-code

Specifies an event code included in the current log.
Syntax
event-code value
Parameters
value
Guidelines
This command allows only log message that contain specified event codes to be
written to the current log target. Thus, it is possible to create a log target that only
collects log messages for a particular set of event codes, for example, Operational
State down.
Use the View List of Event Codes from the WebGUI to view a list of all event
codes.
Related Commands
event-filter
Examples
v Creates a file-based log that contains only XML parser events.

event-detection

Suppresses identical events.
Syntax
event-detection {on | off}
392
Command Reference
# event schema error
# event xmlfilter error
# event crypto error
# event ssl error
# event auth warning
#
Identifies the hexadecimal value of the event code.
# type file
# event-code 0x00030001
# event-code 0x00030002
# event-code 0x00030003
# event-code 0x00030004
# event-code 0x00030005
# event-code 0x00030006
# event-code 0x00030007
# event-code 0x00030008
# event-code 0x00030009
# event-code 0x0003000a
#