Table of Contents
Advertisement
Examples
v Enters Validation Credentials Mode to create the ValCred-1 Validation
v Restores the default setting.
certificate
Adds a certificate alias to the current Validation Credentials List.
Syntax
certificate alias
no certificate alias
Parameters
alias
Guidelines
A Crypto Profile optionally uses a Validation Credentials List to authenticate a
remote SSL peer.
v A Validation Credentials List is required by an SSL client only when it
v A Validation Credentials List is required by an SSL server only when it
Assignment of a Validation Credentials List to a Crypto Profile requires that SSL
validates the certificate that is presented by the remote peer. If the peer fails to
present a certificate on request or presents a certificate that cannot be validated, the
Crypto Profile requires that the SSL connection be terminated.
Prior to adding a certificate-alias to the Validation Credentials List you must:
1. Use the copy command or the WebGUI to transfer the certificate to the
2. Use the Crypto certificate command to create an alias for the certificate.
Use the no certificate command to delete a certificate alias from a Validation
Credentials List.
Related Commands
certificate (Crypto), valcred
252
Command Reference
Credentials List. Specifies PKIX validation mode.
# valcred ValCred-1
Crypto Validation Credentials configuration mode
# cert-validation-mode pkix
#
# valcred ValCred-1
Crypto Validation Credentials configuration mode
# cert-validation-mode legacy
#
Specifies the name of an existing alias for the target certificate. If the alias
does not already exist, use the Crypto certificate command.
authenticates the certificate presented by the remote SSL server. Authentication
of the server's certificate is not required by the SSL standard.
authenticates remote SSL clients. Authentication of SSL clients is not required by
the SSL standard.
appliance.
Advertisement
Table of Contents
